Products and Solutions
Easy transportation

4-6 Units are usually packed together into one bundle which is in one standand 20’shipping container size and transported by standard shipping truck.

Fast installation

Up to 40% time saving on construction over traditional building techniques due to all structural elements being prefabricated

Flexible Combination

Flatpack units can be functioned in various ways and combined flexiably. Providing enough and comforable space for the owner.

Cost saving

Transportation costs are reduced by up to 75% compared with modified containers

Green & sustainable

Flatpack units could be disassembled after finishing one project and reused for another one as the cabin units are made of flexible structures

Roof

Steel Frame :
4mm thick cold rolled & welded steel profiles
Roof Cover : 0.5mm thick galvanized sheet & double folded in the roof middle

Insulation Thickness Ceiling Panels
1 100mm 9mm chipboard (V20), White (Usuai)
2 50mm 50mm steel Sandwich panel (Option1)
3 100mm 12.7mm Glass Magnesium Board (Option2)
ONE FLAT PACKED TRANSPACK CABIN
Floor

Steel Frame : 3mm thick cold rolled & weded steel profiles;

Insulation Thickness: 100mm mineral woo/100mm PU;
Subfloor : 0.5mm thick, galvanized steel sheet

Floor Board

18mm magnesium board ( water resistant v 100):

  • The board complies with the emission value E1;
  • Parallel compressive strength = 35.7MPa;
  • Formaldehyde emission ≤0.4mg/100g
  • 1.5mm thick vinyl sheet;
  • Flammability class B1 – hardly combustible;
  • Smoke density class Q1-low smoke emission;
  • Welded seams ;

Fiber cement floor:

  • Density : 1.26kg/cmm3 k = 0.18W/m.k;
  • Waterproof, moisture content = 0.13%/m2;
  • Formaldehyde emission ≤0.2mg/100g
  • Deformation, Parallel to the bending
  • elasticity = 6055MPa;

18mm thick marine grade floor:

  • Compressive strength = 88MPa;
  • Formaldehyde emission ≤0.4mg/100g
  • Deformation, Parallel to the bending elasticity = 8030MPa
  • Waterproof, moisture content≤6.0%m2
Container
Wall Panels

Exterior cladding : 0.5mm thick corrugated or flat galvanized and coated steel sheet ;
Insulation : 60mm, 70mm, 80mm, 100mm;
Internal Cladding :

  • Laminated E1-Emission Valued 9mm thick chipboard;
  • White 12.7mm;
  • Parallel compressive strength = 18.1MPa;
  • Formaldehyde emission = 0.1mg/100g
  • Water expansion ration = 0.2%;
  • Low smoke and non flammable ;
  • Flammability class A1-non-combustible;
  • Smoke density;
  • Smoke emission;
  • 0.5mm thick galvanized and coated color steel sheet;
WALL_PANELS_ASSEMBLED
Electrical System

CEE Socket & Plug: 16A – 50A;

IP44 – IP67

Wirings : 1.5mm2 – 10mm2

Voltage : 100V – 240V

Circuit Breaker : 10A – 250A

Light Fillings : 2* 36W

standard : CE;AS;CSA;PSE;UL

Earthing :

  • 1 galvanized strip iron earth electrode ( 25*4mm) with fastening.
  • The productive earthing installation on site must be carried out by the buyer/hirer
modularena wall panel
Painting color

RAL9002

RAL5010

RAL1018

Painting Thickness

Light Fillings : 2* 36W

Frame :

  • 40-50µm primer
  • 40-50µm topcoat

Paint type
Priner : Epoxy resin amine paint

Topcoat : Chlorinated rubber resin paint

TRANSPACK CABINS
Container
  • High strength & environment-friendly floor boards
  • Waterproofing & High-Insulated container
  • Standardized Container Height
  • Damage -proofing & Ensured Floor Stability
Container
Installation Process

Flatpacks are the most convenient and popular product of us which can be functioned as

  • Accommodations
  • Kitchen & Mess
  • Laundry
  • Sanitary Blocks
  • Office Blocks
  • Medical Units
  • Recreation Units
  • Training Rooms
  • Storage Rooms
  1. Storage Rooms
  2. 4 transpack cabins to be one bundle
  3. One flat packed transpack cabin
  4. Steel Structure assembled
  5. Wall panels assembled
  6. Ready to use
Insulation
Mineral Wool

Density : 40kg/m3 – 120kg/m3 ( 120kg/m3 = 0.25W/m2 K)

Others :

  • Flammability Class A-non combustible;
  • Smoke density classQ1 – low smoke emission
  • Certification CE & GL
  • Temperature adjustment – 500c & 120c. K = 0.044W/m.k;
  • Water Ratio≤0.5%;
  • Hygroscopic Coefficient ≤ 5% & ≥98%.
Mineral Wool
PU Foam

Density : 30kg/m3 – 40kg/m3 ( 40kg/m3 = 0.04W/m2 K)

Others :

  • Flammability Class B1-non combustible;
  • Smoke density classQ1 – low smoke emission
  • Certification: strength≥ 150MPa;
  • Temperature adjustment – 500c & 120c. K = 0.044W/m.k;
  • Water vapor absorption ≤ 6.0ng (Pa.m.s)j;
  • Hygroscopic Coefficient ≤ 4%.
PU foam
Glass Wool

Density: 16kg/m3 – 24kg/m3
Others :

  • Flammability Class A-non combustible;
  • Smoke density classQ1 – low smoke emission
  • Coefficient ≤ 4%.
01 (3) Container